YAG Lasers for Trabeculotomy and Capsulotomy

YAG lasers are often used for Capsulotomy and Trabeculectomy procedures. Yag Laser Capsulotomy is a procedure intended to correct posterior capsule opacity whereas Trabeculectomy is a procedure used in Glaucoma patients to relieve intraocular pressure via YAG laser. A Capsulotomy is necessary when the capsule becomes cloudy because of healing scar tissue. This is a fairly common condition post-operatively. The Yag Laser creates a tiny hole in the posterior membrane to allow the passage of light through and to restore clear and unobstructed vision. A Trabeculectomy or SLT (Selective Laser Trabeculectomy) is partial removal of the trabecular meshwork and surrounding areas to drain excess fluid and relieve pressure.

Many YAG lasers on the market now boast the dual features that enable an Ophthalmologist to perform both Capsulotomy and Trabeculectomy procedure via one laser. This allows an Ophthalmology practice to utilize available space and decrease the amount of large equipment needed. Many of these YAG lasers offer upgradable features that are available to add on at a later date, insuring your practice stays up to date.
CompanyLumenis VisionLumenis VisionLumenis VisionLumenis Vision
ItemLumenis Selecta II™ Portable, Clip-on, SLT LaserAura PT™ Ophthalmic YAG Photodisruptor LaserSelecta Duet™ SLT and YAG PhotodisruptorSelecta Trio™ YAG Laser, SLT and Photocoagulation
PriceInquireInquireInquireInquire
Vendor Product PageCompany Product PageCompany Product Page
DescriptionThe Lumenis Selecta II™ SLT laser offers you all the advantages of a premium SLT product together with true portability and maximum space utilization. The Selecta II is a clip-on product, conveniently fitting onto most commercially-available The preferred product for anterior-segment procedures such as laser iridotomy and capsulotomy, the Aura® PT™ Ophthalmic YAG Photodisruptor Laser System includes advanced specifications which make treatment fast and accurate for superior patient care.The Lumenis Selecta® Duet™ represents the industry's most advanced anteriorsegment laser, combining the advantages of YAG photodisruption capabilities along with the innovative Selective Laser Trabeculoplasty (SLT) technology, which was The Lumenis Selecta® Trio™ represents the next generation of multi-modality products, offering retinal, cataract and advanced glaucoma therapies in a single platform. The unit's integrated design, enhanced optics system and advanced laser cavity
Features
  • True Portability
  • Maximum Space Utilization
  • Compatible with most commercially available converging-optics style slit lamps
  • Two defocus positions that can easily be changed with a roll of your finger
  • Sophisticated focusing system ensures superior accuracy in energy placement
  • Advanced precision optics offer maximum visibility for more precise diagnosis and treatment
  • Compact and lightweight design optimizes the physician's working space
  • Proprietary advanced laser design, with automatic internal tests to ensure power requirements and a secondary control unit to guarantee power accuracy.
  • Highly-accurate Super Gaussian beam profile in YAG mode
  • Table is equipped with built-in compact storage space for lenses or other accessories
  • Ergonomically designed joystick includes a convenient integrated laser fire-switch.
  • Three posterior defocus positions with an adjustable focal point of up to 350 posterior to the aiming beam.
  • Slit lamp function includes a 6-step magnification changer.
  • Table height can be easily adjusted using its electronic up/down switch
  • Homogeneous Laser Beam in Photo-Coagulator mode
  • Dual Fiber Port -- Instantly switch between delivery devices
  • ClearView™ Filters -- Optimized view of treatment site
  • AcuGuide™ Micromanipulator for accurate and safe laser beam guidance for fine-tuned laser application on target tissue.
  • Integrated LaserLink Cradle safely and conveniently stow
  • Table is equipped with built-in compact storage space for lenses or other accessories
  • The ergonomically designed joystick includes a convenient integrated laser fire-switch.
  • Three posterior defocus positions with an adjustable focal point of up to 350 posterior to the aiming beam.
  • Slit lamp function includes a 6-step magnification changer.
  • Table height can be easily adjusted using its electronic up/down switch.
ModeInquireFundamental Q-SwitchedInquireInquire
Weight (lbs)25 lbs (11 kg)System: 46.3 lbs (21 kg)<60 kg>Inquire
MagnificationInquire5 Steps: 6x, 10x, 16x, 25x, 40xInquireInquire
Slit lampCompatible with most commercially available converging-optics style slit lampsCSO SL 950InquireInquire
Spot Size400 microns8 µmYAG: 8 microns
SLT: 400 microns
YAG: 8 microns
SLT: 400 microns
PC: 50 - 100 on Z-Link; 5-500 on Convrg-Link
Cooling SystemAir cooledAir convectionAir cooledInquire
Pulse Length/WidthInquire4 nanseconds (typical)InquireInquire
Repetition Rate3Hz2.5 HzYAG: 3Hz (in single burst)
SLT: 3Hz
YAG: 3Hz (in single burst)
SLT: 3Hz
PC: N/A
Electrical Requirements100 -240 VAC, 50/60 Hz, 3.15 Amps100V - 240V AC, 50/60 Hz100 -240 VAC, 50/60 Hz, 3.15 Amps100-240 VAC, 50/60 Hz, 3.15 Amps
Dimensions (W × H × D)Inquire12.5 in (32 cm) x 20.5 in (52 cm) x 17.7 in (45 cm)InquireInquire
Aiming BeamRed Diode, continuously variable adjustable intensityDual beam 635 nm diode continously variable intensity to 200 µmRed Diode, continuously variable adjustable intensityRed Diode, continuously variable, adjustable intensity
Treatment Laser TypeInquireNd:YAGInquireInquire
Laser WavelengthInquire1064 nmInquireInquire
Laser EnergyInquireContinously adjustable from 0.2 to 10 mJInquireInquire
Burst ModeInquire1, 2, 3 pulses each burst; separation between pulses is 20 µsInquireInquire
Cone AngleInquire16 degreesInquireInquire
Offset FocusInquireContinously variable from anterior (-)500 µm to posterior (=)500 µm; detent steps @ 0, 150, 250, 500 µmInquireInquire
Get quoteInquireInquireInquireInquire