Bipolar Cautery Systems

Showing 4 of 4 products
  • <<
  • >>
Select All
Select up to 5 products from below to compare or request more information.
Compare
Compare for selected.
Force EZ™ Electrosurgical Generator
  • Features: The Force EZ™ generator uses Instant Response™ technology - to ensure consistent clinical performance using less power. Cutting, coagulating and bipolar outputs are designed for a wide range of surgical applications. Select from two cut modes, two coag modes and a bipolar mode to achieve the desired surgical effect. Valleylab REM™ system reduces the risk of patient burns at the return electrode site. Two cut modes offer a choice of pure for a clean, precise cut in any tissue, and blend for cutting with hemostasis. Two coag modes let you choose between low (desiccate) and high (fulgurate). Use high for efficient noncontact coagulation in most applications, and for argon-enhanced electrosurgery. Select low for rapid contact coagulation and laparoscopic procedures. Bipolar mode utilizes low voltage to minimize sticking and charring of tissue. Additional safety features include dosage error power monitor and leakage current controller. Lower voltage reduces sparking, neuromuscular stimulation and RF interference.
  • Cutting Mode: Two cutting modes
  • Coagulation Mode: Two coagulation modes i.e. low (desiccate) and high (fulgurate).
Read More
Inquire
Compare for selected.
Force FX™ Electrosurgical Generator
  • Features: Valleylab introduces the Force FX™ generator which uses Instant Response™ Technology - to ensure consistant clinical performance using less power. Improved performance at lower voltages reduces sparking, thermal spread, neuro-muscular stimulation and RF interference. Cutting, coagulating and bipolar outputs are designed for laparoscopic surgery. Low cut and Low coag outputs use lower voltages to reduce the risks of electrosurgery. Macrobipolar mode is designed specifically for today's new generation of macrobipolar cutting instruments. Valleylab REM™ Safety virtually eliminates the risk of patient burns at the return electrode site. Three bipolar modes: low/precise, medium/standard, and macrobipolar are also controlled by the Instant Response™ system. Low and medium settings utilize low voltage to prevent sparking. CEM™ mode allows the Force FX™ generator to be used with the CUSA CEM™ nosecone.
  • Cutting Mode: Three Cut Modes
  • Coagulation Mode: Three coagulation modes include low/desiccate for low voltage contact coagulation suitable in laparoscopic and delicate tissue work. Medium/Fulgurate for efficient noncontact coagulation in most applications, and high/spray for coagulating large tissue areas with minimum depth of necrosis.
Read More
Inquire
Compare for selected.
Ligasure™

Ligasure™

Valleylab

  • Features: Vessel Sealing Technology™, Instant Response™ technology, bipolar cutting capability, VLCM bipolar current monitor compatible.
  • Cutting Mode: Bipolar cutting capability
  • Coagulation Mode: Inquire
Read More
Inquire
Compare for selected.
Surgistat™ Electrosurgical Generator
  • Features: Easy and quick to set up; compact and light, saves time with automatic access to previously used power settings and modes, provides precise surgical effect with power control dials. Performs most common office-based electrosurgical procedures. Provides ability to change power settings while activating the generator. Includes both monopolar and bipolar outputs. Accepts preferred accessories standard 3-pin pencil, most standard footswitching devices (with adapter), and standard Valleylab monopolar footswitch (optional) - standard 2-pin bipolar footswitching devices. Increased patient safety with a return electrode contact quality monitoring system (RECQMS). The RECQMS system continually monitors patient impedance levels and deactivates the generator if a fault in the patient/return electrode contact is detected.
  • Cutting Mode: Inquire
  • Coagulation Mode: Inquire
Read More
Inquire
Select All
Select up to 5 products from above to compare or request more information.
Compare

Tags:

Please Login or Register to Create Tags

Articles