| Description | Design facilitate injection of silicone oil & other viscous fluids by combining a high pressure tubing w/ultra thinwall cannula | Tip flattened & angled 70° 2.5mm from end, Longer tip allows complete & easy membrane delamination, Cannula comes w/20cm (8 in) long luer lock high pressure extension tubing set, Capable of withstanding injections of viscoelastic fluids. (Cannulas | Sleeve extends 3mm beyond end, .90mm (20G) probe, 1.4mm (17G) sleeve | Sharp tip angled 45°, for removing premacular, epiretinal, & other vitreoretinal membranes | Sleeve extends 6.0mm beyond end, Allows atraumatic entry through retinal or macular tears or holes & enables aspiration of subretinal fluid. Overall length with tubing 35.0mm (1 3/8 in). |
| Gauge | .90mm (20 G ) ultra thinwall Cannula, 45° beveled tip; 4.0mm long | ID-0.50mm (.02 in); OD- 1.5mm (.06 in) long luer lock, high pressure extension tubing set. | .90mm (20 G) Overall length with sleeve 32.0mm (1 1/4 in) | .90mm x 25.0mm (20 G x 1 in) | .90mm (20 G) |