Bipolar Cautery Systems

Showing 9 of 9 products
  • <<
  • >>
Select All
Select up to 5 products from below to compare or request more information.
Compare
Compare for selected.
Bi-Polar Cautery

Bi-Polar Cautery

Synergetics, Inc.

  • Features:
    • Available in 23ga. and 25ga.
    • Fully disposable design
    • Heating occurs only at the tip
    • Provides bloodless cutting in large diabetic cases
    • Compatible with most bi-polar cautery units
    • Boxes of 6
  • Cutting Mode: Inquire
  • Coagulation Mode: Inquire
Read More
Inquire
Compare for selected.
Bipolar Coagulation Unit
  • Features:
  • automatic unit test performed when unit turned on
  • operation continuously monitored
  • visual and audible alarms and indicators
  • storage functions for instant recall of surgeon specific settings
  • Cutting Mode: Inquire
  • Coagulation Mode: 0.1 to 9.9 watts in micro power range; 1.0 to 50.0 watts in macro power range; power adjustable in 0.1watt increments.
Read More
Inquire
Compare for selected.
Excaliburplus PC®

Excaliburplus PC®

CONMED Corporation

  • Features: Pure cut maximum peak to peak voltage is 2000 volts. Blend 1 - maximum peak to peak voltage is 2000 volts. Blend 2 - peak voltage of 2200. Blend 3 - the Excalibur Plus PC® comes equiped with the maximum peak to peak voltage of 2400. Safety: the Aspen Return Monitor (ARMÙ) or ARM is the most sensitive pad monitoring system available. It combines automatic feedback circuitry and visual displays to provide the most sensitive contact quality monitoring system available today. ARMÙ Continuously monitors the safety of the Monitoring patient to ground system pad interface with a dual foil ground pad. Disarms the ESU and alerts the staff if a pad fault condition occurs. ARM operates in a preset safety range of 10-150 ohms. Once the pad is placed and the resistance is measured this measurement is set. If the patient's impedance level should either increase by 20% or fall out of the preset safety range, ARM will alarm and disarm the ESU. The Assist Bar Graph provides a visual alarm set point and eliminates the possibility of pad site burns attributable to machine error.
  • Cutting Mode: The Excalibur Plus PC® offers a scalpel like cut and three blend modes.
  • Coagulation Mode: Standard coagulation, spray coagulation and 10000 volts peak to peak in spray coagulation.
Read More
Inquire
Compare for selected.
Sabre® 180

Sabre® 180

CONMED Corporation

  • Features: ARM™ contact quality (sensitive pad monitoring system)
  • Cutting Mode: Inquire
  • Coagulation Mode: Inquire
Read More
Inquire
Compare for selected.
Sabre® 2400

Sabre® 2400

CONMED Corporation

  • Features: The Aspen Return Monitor (ARM™) ARM™ is the most sensitive pad monitoring system available. It combines automatic feedback circuitry and visual displays to provide the most sensitive contact quality monitoring system available today. Continuously monitors the safety of the monitoring patient to ground system pad interface with a dual foil ground pad. Disarms the ESU and alerts the staff if a pad fault condition occurs. ARM operates in a preset safety range of 10-150 ohms. Once the pad is placed and the resistance is measured this measurement is set. If the patient's impedance level should either increase by 20% or fall out of the preset safety range, ARM will alarm and disarm the ESU. The Assist Bar Graph provides a visual alarm set point and eliminates the possibility of pad site burns attributable to machine error.
  • Cutting Mode: Thermal damage free cutting is no problem with the Sabre 2400, with its patented controlled output voltage in the cut mode. As the electrosurgical electrode glides through different tissue types in the cut mode, the Sabre® 2400 constantly adjusts the voltage to provide superior cutting performance.
  • Coagulation Mode: Superior spray coagulation at power settings above 50 watts.
Read More
Inquire
Compare for selected.
Force EZ™ Electrosurgical Generator
  • Features: The Force EZ™ generator uses Instant Response™ technology - to ensure consistent clinical performance using less power. Cutting, coagulating and bipolar outputs are designed for a wide range of surgical applications. Select from two cut modes, two coag modes and a bipolar mode to achieve the desired surgical effect. Valleylab REM™ system reduces the risk of patient burns at the return electrode site. Two cut modes offer a choice of pure for a clean, precise cut in any tissue, and blend for cutting with hemostasis. Two coag modes let you choose between low (desiccate) and high (fulgurate). Use high for efficient noncontact coagulation in most applications, and for argon-enhanced electrosurgery. Select low for rapid contact coagulation and laparoscopic procedures. Bipolar mode utilizes low voltage to minimize sticking and charring of tissue. Additional safety features include dosage error power monitor and leakage current controller. Lower voltage reduces sparking, neuromuscular stimulation and RF interference.
  • Cutting Mode: Two cutting modes
  • Coagulation Mode: Two coagulation modes i.e. low (desiccate) and high (fulgurate).
Read More
Inquire
Compare for selected.
Force FX™ Electrosurgical Generator
  • Features: Valleylab introduces the Force FX™ generator which uses Instant Response™ Technology - to ensure consistant clinical performance using less power. Improved performance at lower voltages reduces sparking, thermal spread, neuro-muscular stimulation and RF interference. Cutting, coagulating and bipolar outputs are designed for laparoscopic surgery. Low cut and Low coag outputs use lower voltages to reduce the risks of electrosurgery. Macrobipolar mode is designed specifically for today's new generation of macrobipolar cutting instruments. Valleylab REM™ Safety virtually eliminates the risk of patient burns at the return electrode site. Three bipolar modes: low/precise, medium/standard, and macrobipolar are also controlled by the Instant Response™ system. Low and medium settings utilize low voltage to prevent sparking. CEM™ mode allows the Force FX™ generator to be used with the CUSA CEM™ nosecone.
  • Cutting Mode: Three Cut Modes
  • Coagulation Mode: Three coagulation modes include low/desiccate for low voltage contact coagulation suitable in laparoscopic and delicate tissue work. Medium/Fulgurate for efficient noncontact coagulation in most applications, and high/spray for coagulating large tissue areas with minimum depth of necrosis.
Read More
Inquire
Compare for selected.
Ligasure™

Ligasure™

Valleylab

  • Features: Vessel Sealing Technology™, Instant Response™ technology, bipolar cutting capability, VLCM bipolar current monitor compatible.
  • Cutting Mode: Bipolar cutting capability
  • Coagulation Mode: Inquire
Read More
Inquire
Compare for selected.
Surgistat™ Electrosurgical Generator
  • Features: Easy and quick to set up; compact and light, saves time with automatic access to previously used power settings and modes, provides precise surgical effect with power control dials. Performs most common office-based electrosurgical procedures. Provides ability to change power settings while activating the generator. Includes both monopolar and bipolar outputs. Accepts preferred accessories standard 3-pin pencil, most standard footswitching devices (with adapter), and standard Valleylab monopolar footswitch (optional) - standard 2-pin bipolar footswitching devices. Increased patient safety with a return electrode contact quality monitoring system (RECQMS). The RECQMS system continually monitors patient impedance levels and deactivates the generator if a fault in the patient/return electrode contact is detected.
  • Cutting Mode: Inquire
  • Coagulation Mode: Inquire
Read More
Inquire
Select All
Select up to 5 products from above to compare or request more information.
Compare

Tags:

Please Login or Register to Create Tags

Articles