| Description | Sleeve extends 6.0mm beyond end, Sleeve allows atraumatic entry through retinal or macular tears or holes & enables aspiration of subretinal fluid, Curved tip allows for easier entry into difficult to reach holes. Overall length with tubing 35.0mm ( | Tip flattened & angled 70° 2.5mm from end, Longer tip allows complete & easy membrane delamination, Cannula comes w/20cm (8 in) long luer lock high pressure extension tubing set, Capable of withstanding injections of viscoelastic fluids. (Cannulas | Tip flattened and angled 90° 1.0mm from end, Cannula comes with 20cm (8 in) long luer lock high pressure extension tubing set, Capable of withstanding injections of viscoelastic fluids. ID-0.50mm (.02 in); OD- 1.5mm (.06 in) long luer lock, high | Tip flattened & angled 70° 1.0mm from end, The Cannula comes with a 20cm (8 in) long luer lock high pressure extension tubing set, Capable of withstanding injections of viscoelastic fluids. (Cannulas come with 20cm luer lock, high pressure | Design facilitate injection of silicone oil & other viscous fluids by combining a high pressure tubing w/ultra thinwall cannula |
| Gauge | .90mm (20 G) | ID-0.50mm (.02 in); OD- 1.5mm (.06 in) long luer lock, high pressure extension tubing set. | .90mm x 25.0mm (20 G x 1 in) Cannula with .30 x 5.0mm (30 G x 3/16 in) tip extension | .90mm x 25.0mm (20 G x 1 in) Cannula with .30 x 5.0mm (30 G x 3/16 in) tip extension | .90mm (20 G ) ultra thinwall Cannula, 45° beveled tip; 6.0mm long |